MY 300EX WONT BUDGE!
We just installed new clutch plates and today was the first day I got to ride it and see how they did. At first, it was going great, no slippage or anything, then it started slipping just a little it felt like, then more, then it would just rev and go like 5mph, then nothing! Now it just seems as if the clutch is pulled in at all times and will just rev to the sky and not move! What did I do wrong here? PLEASE HELP ME I HAVE A RACE TOMORROW AND POTENTIAL SPONSORS WILL BE THERE! Someone reply ASAP so I can get this baby fixed up before the race.
profanity deleted by atvbbs

 

im not sure but it might have something to do with your springs. i hope u get it fixed, good luck.

 

take the clutch back out and make sure there is a friction plate in between every clutch plate and U might want to put some washers in behind the springs to tighten them up a little.

 

Check your springs, it sounds like they aren't installed correctly.

 

Check the adjustments on the clutch handle

 

Ok, we fixed it!
It was the springs, we didnt get the tight enough I guess and they had worked their way even looser, so we tightened them back down adn its workin better than ever. Thanks for all the help guys, I really appreciate it.

 

4 hours and 54 minutes later from 1st post.....Click done. Now that's the web at work.

Nice.

 

Thats what I like about the Honda Forum, people here are very helpful

Ride on..............