top end
Mar 19, 2003 | 01:01 PM
#2
Pro Rider
Joined: Jul 2000
Posts: 728
Likes: 0
top end
Of course, any R will "wake up" with a good pipe/silencer air-filter mods (don't forget to rejet).
While you have it apart, depending on the type of riding you do, you can have the cylinder ported to your specific needs.
While you have it apart, depending on the type of riding you do, you can have the cylinder ported to your specific needs.
Mar 20, 2003 | 01:27 AM
#3
Pro Rider
Joined: Apr 2002
Posts: 240
Likes: 0
top end
Go through your bottom end for sure. Replace any bearings if need be. Make sure you have a extremely well built and durable bottom end before you start pumping out big ponies. Check clutch basket, plates, counterbalancer and anything else. What are you planning on doing to it?
Mar 20, 2003 | 07:33 PM
#4
Thread Starter
|
Trailblazer
Joined: Feb 2003
Posts: 75
Likes: 0
top end
well i already have pipe silencer and 38mm carb...but it needs a new top end so i was just curious as what else i should do to it while it was apart....i mostly ride trails and for fun...but do race alittle....soon i hope to get into more though...