First i would like to thank yall for this site and all the good information you sare here. I have a Yamaha Kodiak 400 i think the year is 94 or at least close to that. it has been used very hard in first East Texas in the mud than in West Texas in the rocks. I have never had any problems with it till last year. the front end was making some loud squeky noises so i brought is home. I usually leave it out there in a shipping comtainer. My plan was to buy a new one for hunting season but with the prices of new bikes these days i figured it made good sense to fix mine. I have replaced all the bearings and seals in the ront end and started replacing the u-joints tonight. The u-joint at the diff no problem already installed. But the u-joint at the transfer case is giving me nightmares. I can not fing a way to replace without removing transfer case. I do not want to do that. is there a way? please help. Thanks

 

welcome! this question will be addressed faster in the yamaha section of the forums.

 

thanks i will try that out

 

Welcome to the forums.

 

Welcome to the forums

 

Welcome to the forums and good luck on your project.