New from Mass
Dec 28, 2009 | 06:59 AM
#1
Thread Starter
|
Trailblazer
Joined: Dec 2009
Posts: 31
Likes: 0
New from Mass
Oooops, didn't notice there was an intro section last night when I posted THIS.
Anyways I'm new to here, but not new to forums, some of you may remember me from Macdizzy WAY back in the day, or my recent failed attempt @ TRX500r.org, I sold my 500r to my friend, he's going NUTS on the thing. Actually 90% of the customers at my auto shop came from a forum, Maxima.org. I'm working out of my house now though, unfortunately while I was building the worlds most bad-*** trailer for my bikes a spark from my welder hit some gas fumes and things got real scary real fast. Luckily no-one was hurt, except for my wallet, lol. I lost a car, all of my electronic tools, and the plastics on my YZ250 are now yellow. All in all it cost me about $7k in damage. But I'm back in the groove and trying to phase out working on cars and instead switch to flipping cars, bikes, quads, and whatever. Less liability & don't have to deal with cheap & impatient customers.
I used to race motocross back in the day, which ingrained me with ALWAYS wearing my helmet, I mean ALWAYS, I put it on even if I'm moving a bike 10 feet. Unfortunatly I never learned to not drink and ride until I was about 23 years old (I'm 26 now) And my knees are permanantly fubar'd from wrecking a Banshee when I went flying into a huge rain gulley @ the top of 3rd, how I didn't do more damage I don't know, I shattered a helmet into pieces. My right knee now likes to POP out of place and it's not a pretty sight, hurts for weeks afterwards to. Anyways I'm just saying that to smarten some of you guys up, I already seen a few pictures on here with no helmets AND beers all over the place......
Anyone know a good site to get FSM's for bikes? On the Maxima boards we have some hidden sites to get the FSM's for EVERY Nissan made from the late 80's to 2010. I'd really like to adjust the valves on the LTZ250 before I put it up for sale, and I'm fine with doing it even with no service manual, but the clearance listed on the side of the frame makes no mention of whether it's hot or cold?????
Anyways I'm new to here, but not new to forums, some of you may remember me from Macdizzy WAY back in the day, or my recent failed attempt @ TRX500r.org, I sold my 500r to my friend, he's going NUTS on the thing. Actually 90% of the customers at my auto shop came from a forum, Maxima.org. I'm working out of my house now though, unfortunately while I was building the worlds most bad-*** trailer for my bikes a spark from my welder hit some gas fumes and things got real scary real fast. Luckily no-one was hurt, except for my wallet, lol. I lost a car, all of my electronic tools, and the plastics on my YZ250 are now yellow. All in all it cost me about $7k in damage. But I'm back in the groove and trying to phase out working on cars and instead switch to flipping cars, bikes, quads, and whatever. Less liability & don't have to deal with cheap & impatient customers.
I used to race motocross back in the day, which ingrained me with ALWAYS wearing my helmet, I mean ALWAYS, I put it on even if I'm moving a bike 10 feet. Unfortunatly I never learned to not drink and ride until I was about 23 years old (I'm 26 now) And my knees are permanantly fubar'd from wrecking a Banshee when I went flying into a huge rain gulley @ the top of 3rd, how I didn't do more damage I don't know, I shattered a helmet into pieces. My right knee now likes to POP out of place and it's not a pretty sight, hurts for weeks afterwards to. Anyways I'm just saying that to smarten some of you guys up, I already seen a few pictures on here with no helmets AND beers all over the place......
Anyone know a good site to get FSM's for bikes? On the Maxima boards we have some hidden sites to get the FSM's for EVERY Nissan made from the late 80's to 2010. I'd really like to adjust the valves on the LTZ250 before I put it up for sale, and I'm fine with doing it even with no service manual, but the clearance listed on the side of the frame makes no mention of whether it's hot or cold?????
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
