750 big bore kit?
May 15, 2003 | 03:42 PM
#1
Thread Starter
|
Pro Rider
Joined: Sep 2002
Posts: 386
Likes: 0
750 big bore kit?
Does any one know what the power diff is between a p650 and a p650 with the 750 kit is? Also will the new cdi work with the 750 kit? im thinking about getting a 750 kit IF and only IF it boost my HP alot. any info would be grate!
May 15, 2003 | 11:15 PM
#4
Pro Rider
Joined: Apr 2003
Posts: 225
Likes: 0
750 big bore kit?
Tommyboy84,
I can verify!! On asphalt you have to let off the gas if your weight is back to far, and if your weight is foward you spin a good 20 to 25 ft. of rubber. My one friend (Kaw. dealer) weights about 140 lbs. it doesn't matter whats he does its just smokes em!!
With your weight proper it pulls front wheels about 30 feet or so.
I was going to go dragging this coming weekend, but think I have blown head gasket!(750P Overheating Maybe? )
I am going to e-mail MD, and see if he thinks I can race? This will be the only time I can race all summer.
The CDI will work with it.
I can't wait either!! It should really get up and go then!!!!!!!!!
MD really does a good job on making a motor work. I Love My Prairie!
I can verify!! On asphalt you have to let off the gas if your weight is back to far, and if your weight is foward you spin a good 20 to 25 ft. of rubber. My one friend (Kaw. dealer) weights about 140 lbs. it doesn't matter whats he does its just smokes em!!
With your weight proper it pulls front wheels about 30 feet or so.
I was going to go dragging this coming weekend, but think I have blown head gasket!(750P Overheating Maybe? )
I am going to e-mail MD, and see if he thinks I can race? This will be the only time I can race all summer.
The CDI will work with it.
I can't wait either!! It should really get up and go then!!!!!!!!!
MD really does a good job on making a motor work. I Love My Prairie!
May 16, 2003 | 01:06 AM
#5
Thread Starter
|
Pro Rider
Joined: Sep 2002
Posts: 386
Likes: 0
750 big bore kit?
Wildwill... WOW did you ever make my mouth water!! Does the power com on smoth or does it snap? Like can you handle it in off crambra places or is the throtle responce to grate to get it into bas situations?
May 16, 2003 | 08:45 AM
#6
Pro Rider
Joined: May 2001
Posts: 340
Likes: 0
750 big bore kit?
wildwill, who do you get to do that kind of work? The porting and polishing and so on? I know where and how much the parts cost is, but the dealer here has trouble screwing on an oil filter without crossing the threads. All they want to do is get the work done and out of their face, quantity is money to them. Also, it looks like the ATV has never even seen dirt? You must roll out a red carpet for the trails? Good pics. Give use a few details; Before and after stuff.
May 16, 2003 | 05:08 PM
#7
Pro Rider
Joined: Jan 2003
Posts: 821
Likes: 0
750 big bore kit?
would it be possible to maybe do that engine work to a v-force? do you think the gains would be worth the work??
