NEED HELP JETTING A RAPTOR!!!!!!!!
#1
NEED HELP JETTING A RAPTOR!!!!!!!!
I have a 2001 Raptor. I have had to replace like every freaking thing, but i need to get the jetting right. I have a Full Yoshi pipe kit and a K&N Filter and cant get the jetting right. It loads up on bottom end but if you keep your thumb in the throttle, it runs like a dream.
#3
NEED HELP JETTING A RAPTOR!!!!!!!!
If it runs like a dream at full throttle you answered your own question. (keep it full throttle[img]i/expressions/face-icon-small-wink.gif[/img] )
Ok it sounds like its rich, when running full throttle you are letting more air in to lean the mix, and loading on the bottom usually means to much gas. But as far as jet sizes you really would be better off in the Yamaha forum, they would be able to relate a little better.
Ok it sounds like its rich, when running full throttle you are letting more air in to lean the mix, and loading on the bottom usually means to much gas. But as far as jet sizes you really would be better off in the Yamaha forum, they would be able to relate a little better.
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)