I was wondering where the ignition switch goes once you put on a smoothy hood and what else needs to be done for it to fit.Also where can i get some heavy duty clutch springs for a lakota.My lakota isn't starting either and i don't know what is wrong i checked the wires put fluid in my battery and charged it check the spark plug and don't know whats wrong it isn't the starter it cranks fine when i put a battery charger on it,but when off it just won't crank it makes a click,then won't do nothing else.Any help would be nice.

 

When you put a smoothy hood on you un plug your light and ignition.Once they are unplugged allyou do is start it .That is on a mojave.You dont need the key any more just put switch on run.

 

Thanks for the info ringer.Someone else has to know.

 

Anybody.

 

ringers right.

 

you dont need the key besides for saftey, all the key does is complete a cut-off circuit, when its on the ON position the shut-off circuit is not complete, when its on the OFF position the shut-off circuit is complete. this means if you take out the entire key system the shut-off circuit wont be completed therefore the quad will start, also your starter tihng is prolly a faulty ground, silinoid(dont know how to spell) or you need a new battery

 

Thanks for the help,so all i need to do is unplug the light and ignition and i do need a new battery.

 

where can i get a pick of the smoothy hood for a mojave and how much did it cost?

 

Maier plastic has them for 45.THey dont have a picture available yet. But you might want to ask someone else.

 

look at the galleries in www.kawieriders. com