Kawasaki Discussions about Kawasaki ATVs.

mojave sprocket

Thread Tools
 
Search this Thread
 
Old Dec 14, 2003 | 02:30 PM
  #1  
mojavecan's Avatar
Thread Starter
|
Trailblazer
Joined: Nov 2003
Posts: 84
Likes: 0
Default mojave sprocket

where can i find some mojave sprocket.

thanks
 
Reply
Old Dec 14, 2003 | 05:57 PM
  #2  
boob's Avatar
Range Rover
Joined: Jun 2003
Posts: 129
Likes: 0
Default mojave sprocket

www.sprocketspecialists.com
 
Reply
Old Dec 15, 2003 | 06:22 PM
  #3  
mojavecan's Avatar
Thread Starter
|
Trailblazer
Joined: Nov 2003
Posts: 84
Likes: 0
Default mojave sprocket

i will take a look

thanks
 
Reply
Old Dec 15, 2003 | 06:32 PM
  #4  
rockrider's Avatar
Pro Rider
Joined: Nov 2000
Posts: 894
Likes: 2
Default mojave sprocket

Go one tooth bigger on the counter shaft and it gives you more top end. Stock gearing makes the Mojave rev its guts out at WFO.
 
Reply
Old Dec 16, 2003 | 06:42 PM
  #5  
mojavecan's Avatar
Thread Starter
|
Trailblazer
Joined: Nov 2003
Posts: 84
Likes: 0
Default mojave sprocket

what is the best ratio for a mojave. i know you can put for more top speed a 16/28 gearing and a 11/50 for start but which one is the best.
 
Reply
Old Dec 16, 2003 | 07:25 PM
  #6  
rockrider's Avatar
Pro Rider
Joined: Nov 2000
Posts: 894
Likes: 2
Default mojave sprocket

I don't believe a 16T front sprocket will even fit on a Mo. You can only stray from the stock gearing so far before you will need other mods to compensate. The Mojave is never going to be the fastest quad nor the quickest, so just focus on what you want. Either a little more speed or a little more acceleration.
 
Reply
Old Dec 17, 2003 | 08:46 AM
  #7  
mojavecan's Avatar
Thread Starter
|
Trailblazer
Joined: Nov 2003
Posts: 84
Likes: 0
Default mojave sprocket

greg from CWR said this: With the cam kit, my suggestion for gearing would be as follows:
22" rear tires= 13 teeth in front, 41 in rear
20" rear tires= 14 in the front, 40 in the rear
18" rear tires= 14 in the front, 39 in the rear
With other modifications gearings can change. For instance our 330 race motors run 15 in the front and 38 in the rear.
 
Reply
Old Jan 9, 2004 | 09:14 PM
  #8  
hilbilly's Avatar
Weekend Warrior
Joined: Nov 2003
Posts: 11
Likes: 0
Default mojave sprocket

hey boob do u know were to find a jet kit for a mojave? Thanks..Hillbilly
 
Reply
Old Jan 10, 2004 | 02:34 AM
  #9  
mahnster's Avatar
Pro Rider
Joined: Jun 2003
Posts: 883
Likes: 0
Default mojave sprocket

www.rockymountainatv.com and they have sprockets too there and they are pretty cheap 7 for a front and like 22 for a rear. It feels good to be back on here, my computer has been gone for 2 1/2 weeks cause its a pos.
 
Reply
Old Jan 14, 2004 | 07:26 PM
  #10  
mojavekid13's Avatar
Pro Rider
Joined: Nov 2001
Posts: 1,039
Likes: 0
Default mojave sprocket

I know for a fact that a 14-15 tooth will nto fit on the mojave, a 13 does just that!
 
Reply



All times are GMT -5. The time now is 11:57 AM.