Quad "WARS"
#22
HMMMMMMM----- Kawasaki is a major Hatfield/McCoy Trails System sponser.............. S.W. WVa. would be an INCREDIBLE place to hold such an event. There is a drag strip for quads in the heart of H/M territory.
How about the H/M Trails??????????????????????
How about the H/M Trails??????????????????????
#23
That sounds sweet.
So far.
Windrock
Gunstock
Fort Dodge
Hatfield/McCoy
Any others? Where are some of the other 6 hour races run??
TRX450. is the track at H/c like a harescramble, or for straight drags?
So far.
Windrock
Gunstock
Fort Dodge
Hatfield/McCoy
Any others? Where are some of the other 6 hour races run??
TRX450. is the track at H/c like a harescramble, or for straight drags?
#24
I believe the raceway near Logan WVa has a site. Its name is: Rolling Thunder Raceway. It will be the focal point of "Dirt Days" this year.
The track is limited to drags AND hillclimbs. . I am sure a MX or H/S track can be found in the general area, also.
The track is limited to drags AND hillclimbs. . I am sure a MX or H/S track can be found in the general area, also.
#25
There are only three 6 Hour races this year, one was in Greenville, Texas, the next is May 8th in Macon, Georgia and the last one will be at Raush Creek in Tremont, PA July 17th! I do know that the promoters of the 12 and 6 hour races are looking for more places that would be willing and able to have more 6 hour races next year, maybe even make a series out of it! So if any of you have a spot or know someone who has a place that is at least a 5 mile loop but in a confined area with a little TT, MX and cross country let me know and I can relay the message or get you in contact with the right people! My email is listed in my profile below! Just make sure that you put 6 hour in the subject area. I don't open alot of emails unless I know who they come from, I hate viruses! LOL!!!
6 hour race one day,,,,, quad wars the next! We would have to try to schedual it for a long weekend so it would bring in more people from farther distances!
6 hour race one day,,,,, quad wars the next! We would have to try to schedual it for a long weekend so it would bring in more people from farther distances!
#26
Shotgun,
There is an event this August in Edmonton Alberta a full race challeng to any and all. It will be held at a local race track with 300 foot drags, sled pulling and a mud bog. It was put on this last fall I could not join as my Munchkin Run also falls on the same weekend. It is a long weekend here for us I gather it went over well all events are timed, runs posted, there was 150 quads of all descriptions. A Pol 400 scrambler took bragging rights for the fastest drag machine. It lasted for 3 days it was for quads only I will try to be there for this year may move my Munchkin Run for the meet.
There is an event this August in Edmonton Alberta a full race challeng to any and all. It will be held at a local race track with 300 foot drags, sled pulling and a mud bog. It was put on this last fall I could not join as my Munchkin Run also falls on the same weekend. It is a long weekend here for us I gather it went over well all events are timed, runs posted, there was 150 quads of all descriptions. A Pol 400 scrambler took bragging rights for the fastest drag machine. It lasted for 3 days it was for quads only I will try to be there for this year may move my Munchkin Run for the meet.
#27
Alltoys;
That sounds great, but I would have to leave now to get there on time.
Bring that monster and meet us half way....lol.
I'm doing all this talking, not sure I could go even if it was in Maine...it my busy time.
later
That sounds great, but I would have to leave now to get there on time.
Bring that monster and meet us half way....lol.
I'm doing all this talking, not sure I could go even if it was in Maine...it my busy time.
later
#28
Shotgun,
I hope to make it to S. Dakota this July if all goes well. The east coast is a little far for me S. Dakota is a 2 day heavy drive for me so only one trip this year. I would like to meet with you sometime you could take my rig for a rip my latest dyno chart shows 82.9 HP at 9500 I think you would like it. I am going to try to build a mud racer with comparible HP numbers not useing a blower just big bore with some other goodies. I would actually like it in the over 100 HP catagory but I will see what ratings I can obtain with the Kawi engine. I might have to go with another engine later on but will see how it goes.
I hope to make it to S. Dakota this July if all goes well. The east coast is a little far for me S. Dakota is a 2 day heavy drive for me so only one trip this year. I would like to meet with you sometime you could take my rig for a rip my latest dyno chart shows 82.9 HP at 9500 I think you would like it. I am going to try to build a mud racer with comparible HP numbers not useing a blower just big bore with some other goodies. I would actually like it in the over 100 HP catagory but I will see what ratings I can obtain with the Kawi engine. I might have to go with another engine later on but will see how it goes.
#29
Oh yes, I forgot to mention that Alltoys! The trip he is refering to in S Dakota is being planned for the last week of July near Stergis! A bunch of us are going to camp out and do alot of riding fro a whole week! Anyone else interested in this drop me an email!
#30
I was thinking about something like this the other day on my way to work. We should have a V-Twin type reunion, big[img]i/expressions/face-icon-small-wink.gif[/img] or small welcome!
It sure would be fun. There are a bunch of great guys on this forum that I would like to meet in person as well as their machines! Also see who will get some bragging rights!
We would need a council, I nominate Alltoys for President!
Shotgun as VP of coarse!
Do I have any seconds?
It sure would be fun. There are a bunch of great guys on this forum that I would like to meet in person as well as their machines! Also see who will get some bragging rights!
We would need a council, I nominate Alltoys for President!
Shotgun as VP of coarse!
Do I have any seconds?


