it sounds stupid but I need a pic of the main jet of the Prairie .[img]i/expressions/face-icon-small-shocked.gif[/img]
I'm ordering a couple of main for my ATV but Keihin Italy doesn't recognize CVKR carburetor as they here sell just other aftermarket carbs, also they doesn't give a crap about kawasaki codes or else since here kawi ATVs are not officially imported.
So I need a pic to make them understand what jet I need or at least a description of how do they look.
I would say I've never seen a jet to date.[img]i/expressions/face-icon-small-wink.gif[/img]
please
BudO

 

Go to the kawasaki home page, look for the parts diagram link, click on it, fill in the blanks. Hope that'll help you out!

 

it's just too small to be seen,
I've to explain to the guy by phone how does it look,

I've seen the Sudco web site , are they the 99101-393-XXX series?

sudco

thanks
BudO

 

A jet looks like a very small screw. About 1/4" long. Screws in with a flat head screwdriver. The slot for the screw runs the complete diamater of the screw head. The head of the screw is only 1/32" and the threads continue till the end. Depending on the size (#) of the jet there will be a pin hole runing down the middle of the jet from head to tip. The bigger the jet does not mean the bigger the screw just the bigger the hole. Why are you having so much trouble finding them. I bought mine from the dealer where I bought my prairie 700. He even had them in stock. If you need there # email me @ unifireman@hotmail.com and I'll give you there #. They are located in Florence Colorado (Fremont motor sports)

 

Also sorry left this part out, The screw is brass (at elast I think it is) also around the head of the screw the six of the jet will be listed. However you may need a microscope to read them they are so small. The jets I installed on my prairie were 130 rear and 132 front. I'll have to check for sure. Hope it works. Joey

 

firepig,
the problem is I don't live in US ,I'm italian so everything is a problem here , no kawi ATV dealer, No nothing, is like asking for uranium , call here and there no one give a ...
So I've called keihin italy , they don't know too! they just sell FCR carb and part for dirt bike and so,they don't know CVKR carb(they do it!)he asked me to take down my jet and see how does it look like and tell him how long is this damn jet.(I would do it but I've no time right now)
have you seen the sudco link above can you confirm the type I wrote by the picture?
sorry to bug you all with those stupid things.
BudO

 

first of all these are not stupid things, I love my atv and spent a lot of money on it and am miserable when there is a problem ( only a loose clamp so far, **knock on wood**) so i completly understand. Ifn it were me I would do some searchin online and find a dealer here in the US and just order them, should be pretty simple. Even if it costs a little more money it would be worth it to get your machine goin. GO to
www.fremontkawasaki.com Call em and I'm sure they wont have a problem getting you one! Give her hell!!!!!

 

BUDO

what size do you need? if you pm me with your address i will send you the size you need. im just trying to help.

___________________
02 650p
nyroc muffler
super snorkle
147.5f/152.5r jets
.033 on needles
dynatek cdi
epi black
700p drive spring
water wetter
plow
receiver system
warn 2000lb
bighorn's
to come, air/fuel ratio gauge
home made muffler

 

Fire,
stupid is that I've to find myself a simple code that any Keihin distributor should know of..

Deer,
before I'll have to get this couple of jet in the states can you just give a look at the sudco web and tell me which kind is?

 

BudO, you're correct, it is the 99101-393-XXX listed on SUDCO's site. Hope you can find the jets you need in Italy!