Boyou 400 clutch release
I need a little help understanding the clutch release setup. Currently it is very hard for me to shift gears on my 4x4 Boyou. I pulled off the clutch release cover. What do the top and bottom screws do exactly?
Thanks in advance! |
Boyou 400 clutch release
Per the Clymer Bayou manual
The top screw is the clutch adjuster The procedure is as follows 1 Loosen the clutch adjuster screw locknut 2 Turn the adjuster screw clockwise until resistance is felt, then stop 3 From this point, turn the adjuster screw counter-clockwise until resistance is felt, then stop 4 Retighten the locknut Hope this helps |
Boyou 400 clutch release
Thanks for the help! I will go out and try it now.
|
Boyou 400 clutch release
I have a KLF 400 Bayou also. Did the adjustment take care of your problem? Mine seems to have a clicking or clanging noise at idle. I bought it apart and rebuilt the top end. Started right up and runs great but just has the niose at idle. oes yours?
|
All times are GMT -5. The time now is 08:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands