I am trying to revive an old Mojave and need a couple of questions answered. In the lighting harness up front, there are four or five wires where the front light and key switch attach. The hood was missing when I got this heap, so I need to know which two wires go to the key switch, and also whether they need to be wired toogether or left apart for it to run with no key. I think I remember reading that a teather switch for a Mojave is normally closed so I assume I need to tie the wires together, but I just wanted to be sure. Also, is there a choke **** that can be attached to the carb directly so I can get rid of the handle bar mounted choke handle? I have pulled the parking brake assembly off and would like to be able to switch to a MX style clutch perch instead of that bulky stocker.

Thanks
Jason

 

I dunno the wire colors but to make it run w/o the key you need to leave the wires unplugged. The key is a switch to ground and leaving them unplugged is like having the key "On".

 

Ok, thanks for the info. I'll just seal the connectors up and tuck it all up out of the way.