KFX 700 BELT LIGHT
#1
#2
KFX 700 BELT LIGHT
Yea, mine just came on this past Sunday. Here is the procedure directly from our service bulletin from Kawasaki. 1-Turn off the key.
2- Inspect your belt. 3-Remove the seat and look for 2 four pin connectors. One is black, the other is gray. 3-disconnect both of these connectors and reconnect them to their opposite colors. gray to black and black to gray. 4-turn the key back on. 5-the belt light should be flashing. 6-turn off the key. 7-reconnect the terminals to their original colors. 8-turn on key and check to see if worked!! Good luck!
2- Inspect your belt. 3-Remove the seat and look for 2 four pin connectors. One is black, the other is gray. 3-disconnect both of these connectors and reconnect them to their opposite colors. gray to black and black to gray. 4-turn the key back on. 5-the belt light should be flashing. 6-turn off the key. 7-reconnect the terminals to their original colors. 8-turn on key and check to see if worked!! Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 10:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)