Help please!!!!!!!
#1
#2
Help please!!!!!!!
At 100 hrs or around there you light will come on. Just check your belt and see if it has any visible problems and then reset the belt light. Its simple.Procedure:
under the shifterthere is some connectors. Fine the two big ones(5 pin) that are BLACK AND GREY. Take them apart and switch the colers so it will be black to grey and vise versa. ( there is also one connector that wont fit, if you accidently try to put that together it wont fit so you know its the other two). Next there is a 2 pin connector that is small and black. Dissconect this. Next turn your key on for 10 secs and wath the light flash. Then turn it back off and put everything back to normal. The light should reset. Good luck and if all this rambling doesnt help ill put it to ya in a better for[img]i/expressions/face-icon-small-smile.gif[/img]
under the shifterthere is some connectors. Fine the two big ones(5 pin) that are BLACK AND GREY. Take them apart and switch the colers so it will be black to grey and vise versa. ( there is also one connector that wont fit, if you accidently try to put that together it wont fit so you know its the other two). Next there is a 2 pin connector that is small and black. Dissconect this. Next turn your key on for 10 secs and wath the light flash. Then turn it back off and put everything back to normal. The light should reset. Good luck and if all this rambling doesnt help ill put it to ya in a better for[img]i/expressions/face-icon-small-smile.gif[/img]
#4
#5
#7
Trending Topics
#8
Help please!!!!!!!
try here: http://atv.dnsalias.com/forum.cgi?vi...0&viewtopic=84
there was a very detailed posting of this . but i cannot seem to re locate it
there was a very detailed posting of this . but i cannot seem to re locate it