ok heres the problem if i go to turn the bars sharply to the right the engin starts to rev with out even touchig th throtal at all but if i turn it to the left it dont do it if have the bars strait whats could be going on help

 

My 04 V force did the same thing. I have a service manual and it was just an adjustment on the throttle cable. Easy fix, just find out how to adjust it. I assume it is your trail blazer? I dont know how to do it for that, but I'm sure somone can help.

 

no its not on my trailblazer its on my kawi

 

check your throttle cable for binding.

monty

 

do i have to take the plastic off of it...will it hurt me wheeler if i dont fix this?

 

sorry I didnt pay attention to see that you had a kawi, my bad. Anyway I dont think it will hurt your quad, its just kinda annoying. My v did it for over a year before I fixed it.

 

Definately the cable, either bound up, or way out of adjustment

 

so how do i fix it with out takeing it to the shop and then haveing to spend money for some thing its not and still have it doing it what do i look for and where and how easy is it to fix

 

All you have to do is to loosen the cable from all other things. Remove zipties, just find the thing that is hitting the cable when you turn. Just slowly turn, and watch the cable to see what it does. When it goes tight, move the cable around with your finger to free it from the object. If you cant fix this by yourself, just adjust the cable a little.

 

ok kool so i take it the cable goes to teh carb right? could i just take the plastic off and watch it that way?