Kawasaki Discussions about Kawasaki ATVs.

2005 650 4x4i brute force

Thread Tools
 
Search this Thread
 
Old Dec 23, 2008 | 12:07 AM
  #1  
eggenz7's Avatar
Thread Starter
|
Pro Rider
Joined: Jan 2007
Posts: 1,047
Likes: 1
From: Troup, Tx
Default 2005 650 4x4i brute force

i just rebuilt the topend and adjusted the valves. the thing busts off every time without fail and idles just fine. but just off idle to about middle throttle it spits and sputters. if i hit the throttle and let off then hit it again it will push over that spot and run good at 1/2 to WOT. any ideas?
 
Reply
Old Dec 24, 2008 | 02:30 PM
  #2  
haoleboy's Avatar
Weekend Warrior
Joined: Dec 2008
Posts: 1
Likes: 0
Default 2005 650 4x4i brute force

What octane gas are you running?
 
Reply
Old Dec 24, 2008 | 03:57 PM
  #3  
eggenz7's Avatar
Thread Starter
|
Pro Rider
Joined: Jan 2007
Posts: 1,047
Likes: 1
From: Troup, Tx
Default 2005 650 4x4i brute force

93 i think. thats what i had on hand. if i put in in gear and punch on it it doesnt act abnormal so im not really concerned with it
 
Reply
Old Dec 25, 2008 | 03:37 AM
  #4  
Hayashi's Avatar
Pro Rider
Joined: Oct 2001
Posts: 1,743
Likes: 0
Default 2005 650 4x4i brute force

It seems the carbs are running little too lean at the mid range where it sputters a bit. Shim the existing jet needles or install next size up (richer).
 
Reply
Old Dec 27, 2008 | 07:47 PM
  #5  
WhatWasIThinkin's Avatar
Weekend Warrior
Joined: Jan 2006
Posts: 12
Likes: 0
Default 2005 650 4x4i brute force

I agree with shimming the needles. Also turn the feul screws out 1/4 to half turn.
 
Reply
Old Dec 28, 2008 | 12:12 AM
  #6  
eggenz7's Avatar
Thread Starter
|
Pro Rider
Joined: Jan 2007
Posts: 1,047
Likes: 1
From: Troup, Tx
Default 2005 650 4x4i brute force

apparently i had to take too much material off the jug to get the scratches out of the front cylinder. it has piston knock and i think it may have broke a skirt off. get to tear into it again it seems
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pgbama11
Kawasaki
21
Jan 16, 2016 08:19 AM
ylomnstr
Kawasaki
3
Sep 22, 2015 12:19 AM
Pgbama11
Yamaha
10
Sep 10, 2015 08:20 AM
ylomnstr
Kawasaki
0
Sep 10, 2015 06:45 AM
ylomnstr
Kawasaki
0
Sep 4, 2015 05:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:07 PM.