air filter malfunctioned
#1
air filter malfunctioned
I ride an 08 prairie. After a dusty ride I decided to clean my air filter. As soon as i removed the air box cover I noticed the factory air filter had come apart at the seam letting dust into my engine. Ive got an aftermarket filter ordered. The engine runs fine but im wandering how much damage was done. The carb intake looked clean but that doesnt mean anything.
#2
I ride an 08 prairie. After a dusty ride I decided to clean my air filter. As soon as i removed the air box cover I noticed the factory air filter had come apart at the seam letting dust into my engine. Ive got an aftermarket filter ordered. The engine runs fine but im wandering how much damage was done. The carb intake looked clean but that doesnt mean anything.
#5
from the manual...
118 182 psi) @630 r/min (rpm)
Says 118 to 182 psi
**** should say I googled this info and took it from the highlifter site
Cylinder Compression Measurement
NOTE
Use the battery which is fully charged.
•
Warm up the engine thoroughly, and stop the engine.
•
Remove the spark plug (see Electrical System chapter).
•
Attach the compression gauge [A] and adapter firmly into the spark
plug hole.
plug hole.
Special Tools - Compression Gauge: 57001-221
Compression Gauge Adapter, M12
Compression Gauge Adapter, M12
1.25: 57001-1018
•
Hold the throttle wide open and crank the engine with the electric
starter or the recoil starter several times.
starter or the recoil starter several times.
•
When the gauge stops rising, stop cranking and read the gauge.
Cylinder Compression (Usable Range)
Electric Starter: 810 1260 kPa (8.3 12.8 kgf/cm8182, 118 182 psi) @630 r/min (rpm)
Says 118 to 182 psi
**** should say I googled this info and took it from the highlifter site
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)