2000 Kawasaki Bayou 220
#21
#22
The following users liked this post:
PELang2013 (05-10-2020)
#25
The following users liked this post:
PELang2013 (05-11-2020)
#26
it’s running better now. I decided to check the valves with a feeler gauge. Adjusted the screw on the bottom of the carb beside the bowl (idr the name of the screw, but from what i read it said to turn it all the way in then back it out 5 turns)
ran GREAT and rode for a while. I came to a stop a few times and it shut off on me a couple times. Fired right back up after it cut off on me though
#27
The following users liked this post:
PELang2013 (05-13-2020)
#28
the vent tube coming out of the gas cap?
it’s running better now. I decided to check the valves with a feeler gauge. Adjusted the screw on the bottom of the carb beside the bowl (idr the name of the screw, but from what i read it said to turn it all the way in then back it out 5 turns)
ran GREAT and rode for a while. I came to a stop a few times and it shut off on me a couple times. Fired right back up after it cut off on me though
it’s running better now. I decided to check the valves with a feeler gauge. Adjusted the screw on the bottom of the carb beside the bowl (idr the name of the screw, but from what i read it said to turn it all the way in then back it out 5 turns)
ran GREAT and rode for a while. I came to a stop a few times and it shut off on me a couple times. Fired right back up after it cut off on me though
The following users liked this post:
PELang2013 (05-14-2020)
#29
it’s all good now. I put the inline filter on after i removed the partical