A-arms for a Mojave
#1
#3
#4
#5
Hello
Does anybody know of a phone number or website to Burgard Cycle, or Magnum so I can get ahold of them and talk to them about the a-arms. Hey Mojaveracer how well did those a-arms work from Burgard Cycle. If there is anything else someone can tell me about a-arms please do.
Thanks for your time.
Adam
Does anybody know of a phone number or website to Burgard Cycle, or Magnum so I can get ahold of them and talk to them about the a-arms. Hey Mojaveracer how well did those a-arms work from Burgard Cycle. If there is anything else someone can tell me about a-arms please do.
Thanks for your time.
Adam
#6
#7
The Burgard A-arms worked very well. The handling was improved once I got the camber dialed in but the biggest improvement was in suspension. They added about 2" more travel that made for smoother landings and less bottoming. I had Works shocks on and had to add 1/2" more pre-load on the spring to make it stiff enough for my racing(way too stiff for anything but agressive motocross racing). If I had the time I would have had them re-valved with more rebound and compression damping so that you can run less spring pre-load wich gives softer initial travel, better bottoming resistence, and a lower ride height. The only reason I wouldn't get them again is I would like to try forward swept a-arms to improve handling even more. I am not sure if they do but if burgard makes forward swept a-arms I will get them from there only because they are local. Hope this helps your decision.
Thread
Thread Starter
Forum
Replies
Last Post
Mojave250A
Performance Mods and Project Quads
1
07-11-2015 10:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)