Is there anything I can adjust on the carbs until I order a jet kit?
Installed Diamond G snorkle and now bike has alittle sputter when you nail the throttle. Will this hurt the engine?
Thanks,[img]i/expressions/face-icon-small-confused.gif[/img]

 

well,
with the snorkle the mains are about 1 size small...
untill you get some mains that are right, either a stock 145 put in rear (6 bux)
and take the 142 out of the rear & put in the front, or a dyno jet kit (45 bux)
change the needles & mains, but both of them require the screws in the bottom of the carbs (mix screws) to be richened up 1/2 to 3/4 turn..
I did the stock jetting to mine, & have a jet kit here I need to get rid of..(if you are interested..)

 

what do you want for the jet kit I am getting the snorkel this week so will need kit

 

Rhino,
Private message sent...