Hello,

I was wondering if anyone had info on a Monsoon ATV. I'm looking for their site but cannot find one yet. I have another 1.5 hours till I go look at a used one and have no idea what I may be getting into.

Any help would be greatly apreciated.

Thanks in advance.

 

[Sarcastic] Wow what a ton of info [/Sarcastic] Hee Hee Hee

Well I picked up a Monsoon 90 for the kids yesterday and I must say those little ATVs impress me. I left the kids at home so it would be easier to turn down if there was something I did't like.

Since there was no kid there to test it I ended up hopping on it and taking it for a ride. [img]i/expressions/face-icon-small-smile.gif[/img] At first it felt like it didn't want to move like I expected and then it was actually peppy even with me on it. I bet it gets better after a plug change and new gas, the stuff that was in it has been there for a while. [img]i/expressions/face-icon-small-smile.gif[/img]

We settled on a price and I took it home. [img]i/expressions/face-icon-small-smile.gif[/img]

I can't wait to take the kids outside and let them try it a little. Whoohooooo!!!

 

help... i came across a 2000 monsoon 90 cc, that needs some parts do you know where i can get some ???
i can't find anything on the web

please help ???!!!!

 

They are not that bad of a machine. You can contact Justin at Dinli for pipes tyhat fit. Tell him I said, the Dinli Ex-Pipe fits good. You will need a 28mm carb and clutch kit. A-Arms are old style E-Ton set-up. You can swap to a hydralic rear brake with the Dinli brake set-up. He can fix you up.Justin Hall

 

jaimelee913

Here is the info off the manual

Monsoon Motorsports
4012 E Broadway Suite 310
Phoenix, AZ 85040
1-888-926-6554

The number still works, I beleive they changed their name to Yerf-Dog. I called before buying ours and you can order your parts there. If they don't have them they will give you a number to the place that can. The previous owner said they had good service.

 

TRexTommy51

They already come with rear disc, just not hydraulic.

 

I know. You can get the caliper and hand assy straight off a Dinli to go on it.

 

thanks for all the info .... i'll let ya know how i make out

thanks

 

What is your opinion of the monsoon 90. I have an opportunity to trade my 2004 LT50 for a 2001 Monsoon while getting money back or I can just keep my 50 and purchase a e-ton 90 for 1995.0 out the door with a free helment. My e-mail address is jrthomas@pennswoods.net

Rob

 

Well we have barely used it at all. I haven't had the time to adjust the carb so it will only put 250 feet before it sputters and dies. If you have the throttle screw turned out and can give it a bit of throttle then you will not have to worry. [img]i/expressions/face-icon-small-smile.gif[/img] It is a bit peppy and the rear disk brake is not to shabby.

Even with the next to bald tires when taking sharp turns the tires rub the fender. I'll look into a fix for this later this summer. I was originally told it was a Kawasaki motor but Kawasaki and Suzuki as far as I knew only made 50 and 80s.

All in all it's a pretty slick machine but then again We have barely used it at all.