Adding FMF Pipe To a LT 80 With No jetting Changes
#1
Adding FMF Pipe To a LT 80 With No jetting Changes
I was reading on midwestmini.com about the fmf pipe for the lt 80 and they say "This pipe features a true expansion chamber design for an excellent midrange and top end power increase. Easily bolts right on without jetting changes"
How can u add a pipe with no jetting changes at all are lt80s jetted rich to start with?
How can u add a pipe with no jetting changes at all are lt80s jetted rich to start with?
#2
Adding FMF Pipe To a LT 80 With No jetting Changes
I have an LT with a FmF and I actually jetted DOWN. They are jetted extremely rich from the factory. The FmF are good for a stock motor.That's what they were designed for. It may run a Little better but not a whole lot. If you want to stay stock and have a shinny pipe then it's a great pipe in my opinion!
#3
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)