I just purchased a Kazuma 90 Mini Falcon Deluxe and need to change the shipping oil . The Book says the plug is the 17" at the bottom but that plug will only come out so far then it hits the frame . The 14" screw will clear but I dont want to take it out if it isnt the oil plug .

Any Idea's which plug is right ?

 

17mm one I think, maybe try to get it around the frame somhow

edit, may have to lift the engine up some, haven't heard of this problem though. It should not be hard to lift it up the amount u need, just take the bolt loose and lift it up, drain oil, put it back together, maybe an extra 10 min or so of work.

 

Thanks for the quick response and I did what you said and it worked .We had to loosen the 4 bolts on the bottom of the unit and lift the engine just a bit to get the plug out because the frame was blocking it .

It worked but what a odd place to put and engine drain ..they should really look into moving that .

 

do not take out the one by the frame. It is the 17mm one to change the oil. The one on the right side.

 

The 17mm screw is the one that lines up directly under the frame and almost came out but needed that little bit more room that was why we had to lift the engine a bit