Good day everyone!! I have just purchased a 2006 Rider ATV-150 and it needs a clutch. I have done in my opinion a search on the net and have found nothing. If anyone has any ideas, i would greatly appreciate.
Thanks for your help

 

i won't tell you where to order the part their's many places that have it . but will get you started, the chinese use the honda gy-6 engine clone for the their 125-150cc atv's. with that information you should beable to do a web search or e-bay search and find one.

 

Thanks for the help...ill give it a shot.

 

<div class="FTQUOTE"><begin quote>Originally posted by: billl2099

i won't tell you where to order the part their's many places that have it . but will get you started, the chinese use the honda gy-6 engine clone for the their 125-150cc atv's. with that information you should beable to do a web search or e-bay search and find one.</end quote></div>

How long have the gy-6 clone been out?
And are the still useing them in the 2007 models?
.......Thanks.........I getting one on Sat.(150cc auto with reverse)

 

yep that 'll be a gy-6 engine, lots of hop-up parts available for it, plus replacement parts are easy to obtain.

 

Good Morning Bill !!! Thanks for your reply to my question, and i wanted to give you an update to my problem. I tore into the atv this past weekend,,,and it isnt the clutch thats wrong, its the drive belt. I did go by the honda place and they really didnt have a clue what i was talking about. Told me i had to bring in the part in order to match it up. No part # No model #. So,,,now im looking for the belt. The one that was on the atv was in shreds. So i took a measurement and will see if the Honda folks can match that.

Thanks again

 

Sir call Rob Groves at this 817-717-7004 and he can get you that belt. If you cant get him on the phone email me and ill get a hold of him and get you the belt.

 

onemanredtide, your honda shop is stupid, kids behind the counter? the gy6 is a honda motorscooter engine from the mid 80's, here's a couple places that have your belt, and while you're ordering the belt you might as well order lighter roller weights, stock is 14grs, 9-10grs work best, i would order the sliders instead of the rollers, they last longer and allows higher top speed, www.miamimoto.com, or www.oregonvintage.com, www.indycycleranch.com, one more thing spend the extra money and buy a kelvar belt, they last almost for ever

 

<div class="FTQUOTE"><begin quote>Originally posted by: onemanredtide

Good Morning Bill !!! Thanks for your reply to my question, and i wanted to give you an update to my problem. I tore into the atv this past weekend,,,and it isnt the clutch thats wrong, its the drive belt. </end quote></div>

What you probably need is a 743-20-30 CVT belt. There should be an ID plate on the engine on the lower front left side. If you see QMJxxx157, then the 743-20-30 belt will work. However there are a few that use the 842-20-30.

 

I never thought i would get so much help on such a little subject !!! You people that are on this forum are awesome !!!!! Thank you very much for the very much needed and appreciated help. OOOOOOOO,,,and by the way...the ones behind the counter at the Honda shop were KIDS...lolol.

Thanks again guys.
Craig