i have an '88 TRX310R with LSR chrome a-arms but i dont know their width...they're either +1 or +2s but i was wondering...if they are +1's will the TCS Long-travel shox fit on them? Thanx

 

shure they will build them to work with the a-arms

 

you will need to knoy how long they are i can get you stock meashurements if you want.

 

tcs shocks will works if their set up for +2 a-arms just not as well. i had them on my stock a-arms and +2, but i suggest you get them made for your length a-arms

 

87_250R i'd appreciate it if u'd measure your stock a-arms for me. Then i can go off that and see what width mine really are. Thanx

 

well i got 14" on the bottem arm from center of the bolt (from frame) to center of the ball-joint following the front arm. On the top it was 11". BUT the 88-89 have the arms forward 1" so i do not know if it would be the same. http://pub20.ezboard.com/bhondatrx250r is a good place to get info and i can post your post from above if you want me to (that way you would not have to sign up) or you could post it (i can no prob.) or a nother thing would be call/e-mail LSR and se if you could get some spec's.

 

87_250R- Thanx a bunch for measuring them for me! I didnt know '88 and '89's were 1" forward but ur prolly right...i dunno...ur measurements might help me though...if you would, i'd appreciate it if u posted it for me on that other forum. I need someone w/ a stock '88 or '89 to measure for me. If i cant find nothen out i'll prolly end up callen LSR =) Thanx again

 

http://pub20.ezboard.com/fhondatrx25...picID=82.topic there it all is you can e-mail me with anything at mr_quad@lycos.com