I was wanting to invest into a ATV stand, but I am not sure. The one that catches my eye is the one that James Lucky has for sale, but how does it work? I assume u tilt the quad back, hook it on somewhere, and pull the quad up. But any input anyone can give me would be appriciated.

 

hey sanddude i,am a little in the backwoods but i use a rollabout jack to lift it and slide a nilk crate under the center let it back down all four wheeles off the ground works great and you spend very few dollars 400 foreman no mods

 

plp2,

I know what u mean, I am out here in BFE, (Butt F**K Egypt) as we like to call it. But I was just wondering how they liked it cause I was gonna build one. I was at the steel place yesterday picken up my basic load and thought screw it, I gonna buy some 1x1 tubing. Now all I need to know how they work. I know its a simple thing to build so thats not a prob.

 

Hey all, try SAMS Clubs, you can get a 1000lbs ATV/Motorcycle rolling stand (built in bottle jack) for $99. Nice and heavy duty!!

 

sanddude might look it over and get some idea,s have seen the one,s at sams and they look pretty darn good but 99 bucks will stick with free rolling jack and free milk crate. he he

 

Sanddude,
I use A/C racing's stand. Made of aluminum. I got it from NAC'S Racing. Yes, you do lift the quad onto the rear tires. (With it in gear.) Then place the stand's u hooks near the frame, (Bottom near the swing arm.), and lower it onto the stand. I like mine alot. You can take it to the dunes or even the track if you have to.

 

How high does the AC Stand lift the quad? I figure I gonna build one that lifts the quad off the ground bout 24 inches.

 

It lifts it about 2 1/2 to 3 feet.

 

My wife went and bought me one of those atv-motorcycle jacks from Sam's last weekend.It sure makes doing stuff a whole lot easier.I know the milk crate thing is alot cheaper,but for $99 the jack is a great buy....BOB