Performance Mods and Project Quads Share and ask for information about modifying your ATV or building project quads.

my mojave rips!

Thread Tools
 
Search this Thread
 
Old Jun 4, 2004 | 01:29 AM
  #1  
kybabyn's Avatar
Thread Starter
|
Pro Rider
Joined: May 2003
Posts: 481
Likes: 0
Default my mojave rips!

i thought i would post this here two since some of you dont get to the kawaskai page. I got my supertrapp pipe on and my clam on air filter. man it rips. i put a 145 main in it and left the pilot alone. it sounds as though its ruinning good its not racing at all. but the head pipe did get pretty hot pretty quick. but then again it doesnt have a heat shield like the stocker. i had to put a peice of rubber inbetween the expansion chamber and the fram because it would have rubbed. man it has a nice sound though and i can now whellie in third. i could barely wheelie in second before. how do you do plug checks? i heard that you have to keep it at the rpm that you want to check it at and kill it with it at that exact range by pulling the clutch in simentanialisly. si i check it at idel, 1/4, half, 3/4 and full right?
 
Reply
Old Jun 4, 2004 | 02:56 PM
  #2  
enFORCER's Avatar
Pro Rider
Joined: Jan 2004
Posts: 2,233
Likes: 0
Default my mojave rips!

Congratulations on the pipe and filter..... The plug check is easy. Go some place were you can run it full throttle, let the engine warm up, then put your new plug in and take it for one full throttle run, shut it off and look at the plug... If your jetted right, it will look tan or light brown....
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95wolv
Honda
7
Sep 27, 2024 12:00 PM
exmotocrosser
Polaris
10
Sep 13, 2019 06:12 AM
Steeldon
Utility ATVs
0
Sep 5, 2015 09:38 PM
Mojave250A
Ask the Editor
1
Jul 12, 2015 09:10 PM
Mojave250A
Performance Mods and Project Quads
1
Jul 11, 2015 10:38 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:50 PM.