Performance Mods and Project Quads Share and ask for information about modifying your ATV or building project quads.

need some help...please...

Old Sep 15, 2005 | 04:44 PM
  #1  
myshovel's Avatar
Thread Starter
|
Weekend Warrior
Joined: Sep 2005
Posts: 1
Likes: 0
Default need some help...please...

First of all, it's my first post in this forum and I needing some help with my ride (450yfz) ....A friend of mine recently installed a complete exhaust system ( Fat Boy 4)on my quad and jet settings too, but something got wrong, the header got a hot cherry color after a crank the engine. I know it's all about the jets settings but I don't know the right jet number...if anyone could help me please let know...and about altitud I planning to ride this year in Glamis , so hope to see you guys there........
 
Reply
Old Sep 16, 2005 | 12:40 AM
  #2  
welby's Avatar
Trailblazer
Joined: Sep 2005
Posts: 36
Likes: 0
Default need some help...please...

Was this just at idle or when running through the gears? The headpipe glowing red is a lean condition. Depending on the conditions of when this happened I'd go up one size on the pilot, on the main and raise the needle one click.

As a base rule, I like to start my jetting where I know it's going to be well rich and lean it from there.
 
Reply
Old Sep 20, 2005 | 11:29 AM
  #3  
JustShutUpAndRide's Avatar
Trailblazer
Joined: Sep 2005
Posts: 63
Likes: 0
Default need some help...please...

As a base rule, I like to start my jetting where I know it's going to be well rich and lean it from there.
Sounds like a good rule to me...better too rich than too lean.


 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:37 AM.