Does anyone know who makes an aftermarket airbox to fit a 99 Wolverine. Looking for something w/ increased airflow, already have K&N and FMF Mega II.

------------------

 

Nope, but I think you can get an air box lid thats open from Ala Action for about $120.oo but I'd bet it would be loud, I've just received a Proflow kit for my 98 Wolverine, man this air filter and adapter sure are alot bigger than the stock filter or the Uni I have in it now. after I install it I will post my results under "proflow/wolverine.

 

Check with Pro Design. I'm pretty sure they make a kit for the Wolverine. I have it on my Warrior and I have an idea the two air boxes are similar, pitiful, that is. Many of the accesory cos. list them in their ads in the mags. there priced at $99.

Cal, The AZ hardpacker

------------------
join the Blue Ribbon Coalition online at www.sharetrails.org



[This message has been edited by hot_shoe_cv (edited 07-29-1999).]

 

I put a Pro Flow in mine and it made a huge difference and I went all the way up to a 160 main jet on the carb. I heard that 4-stroke tec makes an after market breather tube but what truth their is to that I don't know someone in the chat room told me they did.

Tigger 98 Wolverine(green)Super Trapp running 8 discs, Pro-flow air filter, 160 main jet, Baja skid plates, Split fire plug, and Oxlite stick stoppers....

 

If you really want or need more do as I did, I installed a 1&1/4th. heater hose in my air box and terminated it beside the stock air intake, it works great and I don,t have to worry about water and mud geating into the air box!!!! cost $8.00 bucks at Advance Automotive, the hose is the type with the spring on the inside so it will not kink.

 

Harold, where exactly did you terminate the ends of the heater hose? It looks pretty tight in there to me.

Thanks,

Brian Isherwood
89 LT250R, 99 Wolverine, 93 WXC 250, 99 Summit X

 

see my follow-up post under kn/proflow