I just got my banshee and iam getting some pipes for it. Since I will have to re-jett it i need to know if I have to take-off the anti-stuck throttle things that are on top of the carbs, and if i do how. thanks

 

I have a Blaster, but still, the "anti stuck throttle things" are just little switches in those big boxes on top of the carbs. The boxes house an arm used to reduce throttle pull. I removed the switches permantley just to make stuff simple, but I DON'T reccommend it. The whole box should just unscrew from the top of the carb and you shouldn't have to even mess with it(referencing to blaster carbs). You'll have to pull the carbs and remove the float bowls, then unscrew the brass jet that sticks up high in the center of each carb and replac eit with the new one.

hope that was enough and not too much and relevant

fastblast

 

if u get a jet kit with the pipes which u should then it will tell u all about how to do it...it is a sinch