What jetting for Boyesen RadValve, FMF, and K&N
Dec 23, 2000 | 12:43 AM
#1
Thread Starter
|
Trailblazer
Joined: Aug 2000
Posts: 66
Likes: 0
I got a Blaster With a FMF Pipe and Silencer, and K&N Air Filter.Now I am going to put in a Boyesen Rad Valve. I have already moved my jet up to a 240 from the stock 230 will I have to change it again? Thanks
Dec 23, 2000 | 06:47 PM
#2
Pro Rider
Joined: Jul 1999
Posts: 629
Likes: 0
JT:
I also live in the metro-Phoenix area and I can tell you are jetted too lean already.
For our altitude, FMF requires a 260 jet with the needle and pilot remaining stock.
The 230 is stock. One step up is not enough for the FMF Fatty Pipe!
I also live in the metro-Phoenix area and I can tell you are jetted too lean already.
For our altitude, FMF requires a 260 jet with the needle and pilot remaining stock.
The 230 is stock. One step up is not enough for the FMF Fatty Pipe!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
