does anybody know of a place that repairs pipes?
websites or phone numbers are needed
has anybody had experience with pipe repairing?

 

if you are trying to remove tha dinge,block off one end of the pipe with a good plug, attach a air hose to the other end, heat the dinged area with a large torch till it is red and the apply air pressure to the pipe. be careful not to blow out the plug and do not overheat the pipe. i have fixed pipes likes for years.

 

what do you use for a plug?
about how much pressure do you use?
what do you do to plug the end with the air hose?
has this ever wrecked a pipe?
thank you

 

i use a rubber plug with a bolt throught it so i can expland the plug by tightening the bolt/nut. i use the same thing on the air hose end with a quick connect fitting. start out with 10 psi and increase it as you need to. if the pipe is creased this will not work.

 

Go to a parts store they have freeze plugs that are made out of rubber and expand.

 

Hello You might want to have a look at a boat plug also...they are rubber and have a bolt through the middle also...they come in a few different sizes as well.....
BB