DOES ANYONE OUT THERE HAVE ANY SUGGESTIONS FOR AFTERMARKET MODS TO PUT ON A 250X SUCH AS MUFFLERS, NERF BARS, SHOCKS, ANYTHING

THANKS ALOT

 

Flyboy, first I would suggest a pipe, FMF or White Bros. or Supertrapp or whatever, they're all about the same. Don't forget a better air filter and air box mods if water and mud aren't around. Then if you want more go w/ a high compression piston and cam. After that are big bore kits. I say don't do much w/out suspension mods though. Works make relatively inexpensive shocks for a 250x. Get some holeshot tires they are very good at traction and sliding both. If you want any more ideas you can e-mail me.



------------------
Cason Simmons 98 300EX

 

Flyboy my e-mail on here is wrong it's csimmons@usit.net if you wanted to email me.


------------------
Cason Simmons 98 300EX

 

what type of air box mods are you talking about? and what type of filter would you suggest? would it be k&n?
what type of muffler do you run on our 300ex?

flyboy

 

I would suggest either drilling about 6 holes in the airbox if water and mud aren't in your riding conditions. Otherwise you could get a Powroll/Motoforce air box lid. As far as filters get a foam one like a Uni or Twin Air. K&N's are for sand mainly.



------------------
Cason Simmons 98 300EX

 

I have a full set of 250x/300ex fenders for sale. Blue in front and white in rear. Good shape. No cracks. I'll sell for $120.
Email me at MOTOMAN446@aol.com for more information.


xcracer250x---92 trx250x 96 cr125r