I bought a Lonestar parking brake block off from Dennis Kirk and put it on my 350x, but I lost rear brakes at the same time. the stock thing I took off had a o ring and this new thing doesn't. Do I need to make a gasket or what? Please help

What have you guys done with yours?

 

I got mine and bolted it up, no problems on my X...

i got a Nac's Plates.. Cant remember if there was an o-ring or not...

Try some permatex gasket goop on it and see if it works.

 

it should just bolt right on, there is no need for a gasket.

 

just put the block off on and the add brake fluid and then bleed then and you should be grinnin!

 

On a different forum they said there might be a inner o ring that is bad and letting brake fluid come through. FOr this one I put it on and lost brakes so I filled the resivour up and bleed them but as soon as I pumped the brakes it just leeked out the plate I put on.