I don't need the Yamaha part number, but instead the actual numbers stamped into the bearings used to carry the stock axle on a Yamaha Banshee. I thought some of you may have an extra one laying around and could give me the number off of it so that I can use it to reference a non-yamaha bearing of the same dimensions.

Thanks,

 

In my book it takes a 6007-2RS. It's 35x62x14mm

 

Thanks much, I believe that is exactly what I needed.

 

Hey dont pay over 5.50 on the bearings. You can get them for like $5.50 a piece a total of $11.00 for both rear axle bearings vs. going to the yamaha dealer and getting them for $20 or parts house for $20 Go to ROCKYMOUNTAIN.COM They are CHEAP ON BEARINGS that is where i get them all and i havent had a problem with them. GOOD LUCK 6007-2RS....... I even think the part number for rocky mountain atv is 6007

 

Hey dont pay over 5.50 on the bearings. You can get them for like $5.50 a piece a total of $11.00 for both rear axle bearings vs. going to the yamaha dealer and getting them for $20 or parts house for $20 Go to ROCKYMOUNTAIN.COM They are CHEAP ON BEARINGS that is where i get them all and i havent had a problem with them. GOOD LUCK 6007-2RS....... I even think the part number for rocky mountain atv is 6007