87 cyclone 250x not starting/no fuel?????

Reply Subscribe

Thread Tools

Search this Thread

Dec 17, 2015 | 04:42 PM

#11

stow_senior

Thread Starter

Weekend Warrior

Joined: Dec 2015

Posts: 15

Likes: 0

Quote:

Originally Posted by old polaris tech

Plenty of them along with crank seals on ebay. Part numbers changed over the years,but the crank shafts didn't. These can fit your 88 model also.New Engine Crank Bearing Seal Polaris Trail Blazer Xplorer Trail Boss 250 | eBay

O cool so the 88 trail boss model carnk bearings fit a ln 87 cyclone? I seen those kits just didnt know if they would work or not

Dec 17, 2015 | 05:19 PM

#12

old polaris tech

Polaris ATV Expert
Retired and loving it!

Joined: Jun 2008

Posts: 24,350

Likes: 44

From: North Texas

Quote:

Originally Posted by stow_senior

So update if anyone cares i found that the drain plug for the crank case was missing but even after putting a new plug in the thing still barely ran so still think it nees crank seals so once i get he running completely ill update what it took thanks for the info

That will stop one from running same as having a crank seal pop out.. Couldn't build up pressure in the crank case. Hopefully seals will take care of the rest of it.

Dec 17, 2015 | 11:36 PM

#13

stow_senior

Thread Starter

Weekend Warrior

Joined: Dec 2015

Posts: 15

Likes: 0

Quote:

Originally Posted by old polaris tech

That will stop one from running same as having a crank seal pop out.. Couldn't build up pressure in the crank case. Hopefully seals will take care of the rest of it.

Thats the hope appreciate the words of wisdom ...so what are your feelings on the cyclone