Couple years ago I picked up a 2000 scrambler 500 everything worked great then loaded it into the truck to go riding that day and wouldn’t start, after some troubleshooting I determined it wasn’t getting spark

after spending hours on these forums I’ve tried literally every single thing from checking connections and replacing parts,I’ve trued replacing the following; flywheel, stator, pulse coil, voltage regulator, cdi, left handlebar assembly and the ignition coil but still nothing?

I’m getting 95ohms from the pulse coil and 19 from the red/black wires from stator which is to spec, I then tried disconnecting the black wire from cdi and still nothing, any help would be greatly appreciated as I’m beginning to lose hope at this point

 

Any help would be much appreciated