Hello, I am a new member but unfortunately have been wrenching for years. I have a 2006 ranger 700 with no spark. I have fuel pump working, fan and hear the rear solenoid click when the key is turned on. however the machine cranks but there is no power going to the coil from the ECU(under the seat). Replaced the crank sensor, Power module(under the hood) and coil wires so far. Can't replace the ecu as they are no longer available. I've tried a different ecu but different part number and off of an 08 so not sure it would tell me anything.
Inspected wires and grounds with no luck Any help would be greatly appreciated Thank you in advance. Scott