Piping a 700 Sportsman ?
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I have a 2002 Sportsman 700 with 1250 miles on it and I am considering having it rejetted and install a aftermarket pipe to get some more power, I've heard that the 700 has alot of power but was reduced down to keep the front end down on the ground. So if anyone has done this and has any advice on what pipe to use or if there were problems, I would greatly appreciate it!
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
i have a 2002 with same milage i put an erlandson performance clutch kit and put a bigger main jet and drilled out air screw plug and adjusted it i kept stock pipe to keep low profile in woods i had to put tammer spring in, low was to insaine i had to use over ride in reverse thats how hi it tached at get go i can ride a wheelie from stop in high as long as i want and i dont have to use low very often in tight spots with no belt burning i wanted to put an aaen megaphone pipe on it but with all the money to upkeep what i break i couldnt afford it. they did knumb them from the factory and you can wake them up but beware of breaking things......jim
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
[img]i/expressions/face-icon-small-smile.gif[/img]ORR.I have the complete Hot Seat Performance speedkit on my 2002 Sportsman 700..2650 miles and have broke nothing on atv yet.(HOT SEAT REPLACED SILENCER WHICH BROKE)This is one awesome ride ..I use it only for trail riding in West Virginia !!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)