thinking about a pred
#3
same here i am just going to rebuild the top end on mine and put the rcr stage 1 kit on there and while im driving that around save up enough money then sell the tb 250 and get a pred 500
#4
Its a great quad, just look for any cracks around the Tank, this is a common on alot of 03 models, including ours.Depending on what kind of riding ytou will be doing I STRONGLY reccomend a seat MOD from HardRock Motorsports if you jump any big air, or your gonna lose your seat over time,Ive had to replace ours due to losing seat in two MX races.Other than small monr things, it has been a great quad and did great on the track and sand.Im anxious to buy a Vortex next.. Your gonna LUV that mid range power too.... ...Good Luck........ Tina [img]i/expressions/face-icon-small-smile.gif[/img]
#7
ITs right around the 40.00 mark. I just bought a new seat to start out fresh and after one time out, its showing little signs that its going to do the same thing .....So Ill be putting back on the seat bolt I got from them......... Tina
Trending Topics
#10
Actaully, the seat pin we DID try and it broke within a short time,we had troubles with the front and rear of the seat, but its the rear that causes the havic and it allows too much play so it causes the front to Gouge out,once its damamged too mcuh, its unfixable and we had to start over with a new seat.So the pin for the rear is a inexpensive cover up,but over time trust me, it wont last. Im not saying this to boost anyones sales, Im saying this to make more aware of what our experience is, I have my old seat still I can post a pic of to show you what the pin did for us,which if your not a heavy jumper or hittin whoops ect you can use the pin and be fine,.if your heavy into MX I stongly suggest the sealt bolt............[img]i/expressions/face-icon-small-smile.gif[/img] Tina
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



