ive seen people on here talk about this before but not many people with the rcr kit gave input and i wana know if it will help you obtain good wheelies i can get about 10 inch wheelies right now just pullin back and its stock at the moment

 

My bud has an all stock tb 250 and he can wheelie good and he is about 125lbs, if it can wheelie stock the rcr kit should help a lot!!!

GOOD LUCK

 

i am 235 pounds and i cant get my 03 trail blazer up for nothing it will come up if i am on a hill and thats it i just ordered my rcr kit but i wont get it till x-mas day i would have thought that my extra weight would help it up...

 

If you wanna do wheelie with a stock tb, I own a stock 2000 trailblazer 250 and I do I stand on the grab bar, and then hit the gas all the way and pull up on the handlebars while leaninn my wiehgt back, its not as hard as it sounds, but you can look at my pictures to see what I mean. PS I am 5'9", I wiegh 140 lbs.

But I am also saving for a rcr kit, and I would like to hear some testimony from people who do have on on thiers about the wheelies.

 

On a belt driven machine with small power like the t-blazer, you gotta lean and pull at the right point in the powerband. A stiffer rear shock setting will help, as will holding the brake a little to get your revs up. A clutch kit will help tremendously...raises the rpm's where the clutch kicks in and the whole quad just snaps to attention. Grab a hpd pipe and full clutch kit and watch it come to life!!

 

for the longest time after i got my rcr kit i had to stand on the grab bar but recently ive learned how to do it sitting down. Its pretty easy once you the the hang of it. Its all about timing.

 

What type of pipe did you get?

 

midrange

 

does the midrange pipe add both bottom and top end? Do you know whta your top speed is with it?

 

adds to the bottom and midrange. umm id guess 59 mph