I got a 2002 Trailblazer. It has a hotseat clutch kit and pipe. I was running the light blue spring but then i switched to the plain spring and it made my TB a little quicker. I was just wondering what spring everyone else is running on their trailblazers and how it runs. Thanks

 

When I frist installed my dalton black and white clutch spring I gained around 10km from it and i lot more acceleration

 

i have a 2002 tb250 i bought it used and was supposed to have a clutch kit in it, the spring is red with yellow stripe, can anyone shed any info on it thaqnk you

 

camino you have an HPD clutch kit.I have one in my kids TB but didnt like the engagement of the red/yellow so put in a brown and it is more ridable for him.

 

how good is the acceleration with the brown?

 

A little sluggish on bottom (ok for trails) but its the power good and stay there. When he hits the pipe he is a real Mudrooster. When he gets more used to the bike I will put the red/yellow back in.

 

So the red/yellow has better bottom end?

 

It is matched to my topend pipe but engagestoo high for my son until he gets used to the bike.It has no bottom end.Not for stock bike!

 

I use the polaris silver spring with modified stock weights and it pulls hard and revs high. The take off is a little agressive but I have managed to tame it down with feathering the throttle so I can still creep slow and just hit it and go. It takes a little getting used to but it really halped with the bottom end lag. You dont notice the lag because it engages higher anyways. I just need to adjust my secondary settings because it shifts out to quickly.

 

How did you modify the stock wieghts?