cutting floor boards on trail boss
#2
#3
cutting floor boards on trail boss
Ya,,,I don't know if I would do it...I know on my scrammy I hate the floor boards...but they do hold my fenders secure...and I took them off and my fenders had way to much play in it..I want some nerfs for my scrammy but I would have to do something to keep those fenders from being so loose???hmmm..I know in my case I will figure it out somehow..but I do hate the floor boards..I want some nerfs
#4
cutting floor boards on trail boss
well i cut my plastic on mine and just take off the black plastic that just bolts on there. It won't wobble too much, but anything is to know is that if ur floorboards have lil footpeg things. If not u will need to buy some and mount them right ontop where the support beam is for the floorboards. Thats what i did and its kinda nice, makes it feel more like a atv and not a big *** tank.
#5
cutting floor boards on trail boss
after i cut my plastic on my trail blazer i toke off the floor boards and under neath there was 2 foot pegs with another piece of metal over top i kept that for a 2 weeks or so but i made some floor boards outa aluminum dimond plate (( old bronco floor boards just cut to the lenght you want and put in some holes [img]i/expressions/face-icon-small-tongue.gif[/img] )) ill take some pics tommrow if i can get out with the freaking foot of snow we suppsed to get
#6
cutting floor boards on trail boss
To get the floorboards off you will have to take the mudflaps off then unbolt the floorboard then cut the plate that goes from both 3/4 pieces of pipe that hold your floorboards in place then cut the front 3/4 in. pipe. After that you need to drill the rivets off the floor boards and reuse them on the back 3/4 in. pipe. After that you would probably want to cut some of the plastic to keep it from flapping too much. But MAKE SURE this is what you want cause it's alot harder to put this back to stock then it was to remove everything! I have pics of my nerfs on my profile page.
#7
cutting floor boards on trail boss
ya thats the thing...I don't know if I want to cut the front bar off when the footboards are off.. and also I don't know if I would want to cut the plastic..I mean If I got nerfs then I would have to to stop the free play but I figure I would eat a lot more mud with less fenders.
Trending Topics
#8
cutting floor boards on trail boss
Yes, I hope you like the taste of mud! lol
We were in some pretty nasty stuff this past weekend. I was hitting it hard in my TB 330 and watching it splatter out to either side. Then I took a turn on a 400ex. The mud shot up so hard it got underneath my goggles.
I'll be sticking with the running boards for now [img]i/expressions/face-icon-small-smile.gif[/img]
We were in some pretty nasty stuff this past weekend. I was hitting it hard in my TB 330 and watching it splatter out to either side. Then I took a turn on a 400ex. The mud shot up so hard it got underneath my goggles.
I'll be sticking with the running boards for now [img]i/expressions/face-icon-small-smile.gif[/img]
#9
cutting floor boards on trail boss
Ya,,,thats what I'm saying...I like the nerf idea..but if you get them then you have to do some lipo on your quad,,,,cutting wise,,,,so I think I'm going to stick with my floor boards..I usually get enough mud for my liking the way it is..I don't need to be in a mudstorm!!