how to tighten my blazer's chain
 

hey i need to no how to tighten my 00 tb's chain helpppp!

how to tighten my blazer's chain
 

First loosen the two bolts that hold the rear brake around the axle. Then loosen the two on the axle carrier. Then take a puch and place it in the small hole on the rear sproket carrier. Make sure the hole is on the top. Then push the quad forward i think tightens it. If not pull it back it will tighten it. Then leave it tight and tighten up the axle bolts first then the brake bolts after.

If you have a problem let me know. I just did mine last week. Very easy.

how to tighten my blazer's chain
 

what do u mean the bolts to the rear brake?[img]i/expressions/face-icon-small-confused.gif[/img]

how to tighten my blazer's chain
 

Look up underneath by the bottom of the rotor. There's two small bolts there, on the axle housing, one behind the other. I think they take either a 7/16 or 1/2 inch wrench.

how to tighten my blazer's chain
 

here is a parts breakdown,the bolts are #12 here

how to tighten my blazer's chain
 

so just losen up thoes to bults showen in Text and then wht

how to tighten my blazer's chain
 

Then do what bisho12 said. If I weren't busy I'd mosey right over and show ya (I'm in Old Town)....

how to tighten my blazer's chain
 

have you tightened it yet? You'll get the hang of it, then it will become very easy [img]i/expressions/face-icon-small-smile.gif[/img]

how to tighten my blazer's chain
 

here, this will help

how to tighten my blazer's chain
 

Hey, when i had to tighten my chain, i broke 2 puch pins, a screw driver, and a couple of nails. The easy way to do it if you start to break things is just losen the bolts, the ones talked about above, and then take a monkey wrench or a large pair of pliers and turn your back end that way. I dont know what was with my blazer, the guy at the shop had trouble doing it too. If your blazer is anything like mine, save the money and just use a big wrench or pliers.