Polaris Discussions about Polaris ATVs.

clutching question

Old Aug 12, 2004 | 10:55 PM
  #1  
scrambler123's Avatar
Thread Starter
|
Pro Rider
Joined: Aug 2001
Posts: 2,239
Likes: 0
Default clutching question

right now i am using a red/yellow primary with s-55 weights. I want a set-up that will be faster in drags and i want the engagement to be close to what it is now. i also have 10-58 weights that i can use as well. I was looking at the hpd gold, blue and dark blue any reccomendations?
 
Reply
Old Aug 12, 2004 | 11:27 PM
  #2  
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Joined: Apr 2000
Posts: 6,688
Likes: 1
Default clutching question

What is your secondary set up?
 
Reply
Old Aug 12, 2004 | 11:30 PM
  #3  
scrambler123's Avatar
Thread Starter
|
Pro Rider
Joined: Aug 2001
Posts: 2,239
Likes: 0
Default clutching question

violet in the 2-1 position i think or maybe 1-2 its whichever one is one step stiffer than 1-1 i cant remember.
 
Reply
Old Aug 12, 2004 | 11:34 PM
  #4  
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Joined: Apr 2000
Posts: 6,688
Likes: 1
Default clutching question

Try it at 1-1 it will lessen the drag on the secondary and let you rev faster but wont have the backshift that you have now.
 
Reply
Old Aug 12, 2004 | 11:35 PM
  #5  
scrambler123's Avatar
Thread Starter
|
Pro Rider
Joined: Aug 2001
Posts: 2,239
Likes: 0
Default clutching question

thanks ill try that. any ideas on the spring?
 
Reply
Old Aug 12, 2004 | 11:39 PM
  #6  
POLARISFREAK's Avatar
Pro Rider
Joined: Dec 2002
Posts: 1,045
Likes: 0
Default clutching question

1-1 is definately good for dragging. IT's hard to say on primary clutching, where is your bike making power at with a trail pipe and race porting?
 
Reply
Old Aug 12, 2004 | 11:42 PM
  #7  
scrambler123's Avatar
Thread Starter
|
Pro Rider
Joined: Aug 2001
Posts: 2,239
Likes: 0
Default clutching question

i really have no idea as far as the rpm range that its making power since i dont have a tach but i do know it's very broad with current set-up. I will be getting a race pipe soon though.
 
Reply
Old Aug 12, 2004 | 11:47 PM
  #8  
POLARISFREAK's Avatar
Pro Rider
Joined: Dec 2002
Posts: 1,045
Likes: 0
Default clutching question

I'd just wait till I got the race or go ahead and get the light blue and try it. That's what comes with the race mod!
 
Reply
Old Aug 12, 2004 | 11:49 PM
  #9  
scrambler123's Avatar
Thread Starter
|
Pro Rider
Joined: Aug 2001
Posts: 2,239
Likes: 0
Default clutching question

the light blue has a higher engagement then what i have now, but if i used that with the heavier weights would it keep the engagement close
 
Reply
Old Aug 13, 2004 | 01:39 AM
  #10  
scrambler123's Avatar
Thread Starter
|
Pro Rider
Joined: Aug 2001
Posts: 2,239
Likes: 0
Default clutching question

anyone have any input
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:31 PM.