hub won't disengage??
 

The left front hub on my xplorer 400 will not disengage anyone know why this would be happening? the right one is functioning properly.

hub won't disengage??
 

I don't know??? I think my sportsman 500 has an intermittent left hub issue, too.

hub won't disengage??
 

only thing i can say is to start by checking the hub fluid level, or just change it altogether.

i have had an intermittent hub issue as well,,,, but i can get it to disengage by going in reverse, then forward.

X

hub won't disengage??
 

Same.

hub won't disengage??
 

this one is stuck and has been for a while going in reverse does not help.

hub won't disengage??
 

did you recently grease it?? I am not 100% sure if the xplorer has spots to grease but on our magnum we greased it and then the hub wouldnt disengauge....then we found out the dealer gave us the wrong type of grease...the stuff he gave us was to heavy and it would make it engauge

hub won't disengage??
 

when going in reverse than forward again fixes it, that means you need to change your hub oil

hub won't disengage??
 

this used to happen to me all the time. leave it in 2wd then put it in "N" and trun it left n right a few times, then go in R, and back in to drive, if that don't work you may need a new hub spring, i did. i have takeing my hubs apart lots of times. mostly cuz i keep riping my 4 wheel drive boots.[img]i/expressions/face-icon-small-mad.gif[/img]

hub won't disengage??
 

the boot on that side is ripped and it has lost some fluid could that be part of it?

hub won't disengage??
 

Yep thats your problem.....