Polaris Discussions about Polaris ATVs.

scrambler rear hubs.

Old Nov 17, 2004 | 06:34 PM
  #1  
jordan400's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2004
Posts: 100
Likes: 0
Default scrambler rear hubs.

okay well heres the deal. my uncle had a 250r threewheeler sitting behind his garage(completely garbage now) but its got some nice 8 inch gold rear rims that look sweet. so i wanted to ask and make sure they would fit the scrambler before i even asked him about it. in dennis kirk it says the scrambler bolt pattern is 4/4" and the honda is 4/110. is that a big difference or could i maybe make it fit if it wasnt to great of a difference. and another option i thought was just put the hubs on the scrambler axle if htey fit or maybe change out the whole axle if possible(its likely).
 
Reply
Old Nov 17, 2004 | 06:38 PM
  #2  
Troyer23J's Avatar
Pro Rider
Joined: Dec 2003
Posts: 872
Likes: 0
Default scrambler rear hubs.

I am not 100% possitive, but I dont think the wheels will fit your hubs, and I dont think the honda hubs will fit your axle.
 
Reply
Old Nov 17, 2004 | 06:38 PM
  #3  
Troyer23J's Avatar
Pro Rider
Joined: Dec 2003
Posts: 872
Likes: 0
Default scrambler rear hubs.

You can buy hubs to make the wheels fit though.
 
Reply
Old Nov 17, 2004 | 06:39 PM
  #4  
jordan400's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2004
Posts: 100
Likes: 0
Default scrambler rear hubs.

damn... well thanks for the help. anyone else know for sure?
 
Reply
Old Nov 17, 2004 | 06:40 PM
  #5  
jordan400's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2004
Posts: 100
Likes: 0
Default scrambler rear hubs.

where can i get them...and how much do they cost cause if they cost a whole lot i think ill just stick with my origianal plan and buy an itp rear set.


(oh and how is your quad coming, do ya got it all built up yet. im real curious to see how it is ganna turn out?)
 
Reply
Old Nov 17, 2004 | 06:46 PM
  #6  
Troyer23J's Avatar
Pro Rider
Joined: Dec 2003
Posts: 872
Likes: 0
Default scrambler rear hubs.

Its close, just waiting on a few key things.

The hubs are 125-175. I would just go with the ITP wheels.
 
Reply
Old Nov 17, 2004 | 07:09 PM
  #7  
jordan400's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2004
Posts: 100
Likes: 0
Default scrambler rear hubs.

damn if htey dont work i'll just go with the itp set maybe. cuz tires for those rims are 95$ bucks a piece which is crazy.
 
Reply
Old Nov 17, 2004 | 07:49 PM
  #8  
Bradracer18's Avatar
Extreme Pro Rider
Joined: Sep 2003
Posts: 3,160
Likes: 0
Default scrambler rear hubs.

Or you can just redrill the wheels(on the offset) to match the hubs on the scrammy.......I've done this before........but you have to be precise....
 
Reply
Old Nov 18, 2004 | 02:24 AM
  #9  
Bing's Avatar
Super Quad Patrol
Smokes meat all the time!
Joined: Sep 2002
Posts: 12,479
Likes: 0
Default scrambler rear hubs.

just a side note

old rode hard rims may not be what they look like (they may very well already be beat/out of center wobbly)

the scram is a much heavier bike,,,,that would beat the heck out of a light weight race rim (if thats what it is)

it just doesnt sound like a good match (from a distance)

i vote for a new set of scrammy rims too
 
Reply
Old Nov 18, 2004 | 09:22 AM
  #10  
jordan400's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2004
Posts: 100
Likes: 0
Default scrambler rear hubs.

well either way there ganna be a light weight rim. cause if these dont work im just ganna get itp rims which are light weight. and if i can get these to work i'll just buy tires for them and if the rims go to hell i'll get new rims. they should be fine though cause i dont race or anything the biggest jumps im hitting are crossings. so its not like im all that hard on it.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:12 AM.