Have an 03 pred with full yosi exhaust, cdi and new mod air intake which extends from the carb via a pipe 14in long going into the opened airbox, which nows has k&n with outerwear. Any help would be greatly appreciated as right now it seems to bog down and when I pin it, it sumps but recovers. Running a 180. Thanks in advance

 

Do you have the Rath K&N Intake? I running a 172.5, with my set up. Do a plug check and see what it looks like, I think you might be rich.

 

Not a Rath but a pipe made for me, bent so K&N sits just inside opened airbox. Tried clamp on but would fall off at dunes sometimes, not willing to take risk so this setup will not come off.

 

I also have the bottom of my air box, It works good for a splash guard.....I sold my Rath Intake...i'm going with the Twin Air. I would do a plug check and see what it looks like.

 

Be careful as sometimes they fall off and if you are around sand then you have a problem. This is why I went to a rubber piece at connects to the carb and the pipe to the K&N. Trying to dial it in but having a hard time.