I just washed my mechine and was riding it to put in in the garage and the light on the dial went out. I dont know if i burned somehting up or some water go inside. I took the light housing off and checked the wire harness and none of them are wet. Hopefully when it all dryes out it will work. Has anyone ever had this happen. The lcd still works just the back light wont.

 

Never mind after about two hours of drying out it works good as new. Must have just got a little mosture in there. Has this ever happened to anyone?

 

if u are getting moisture in it from washing it, u may have larger issues later on. It is a sealed unit, and should not be getting any moisture in it al all. good luck bud.