Well i'm finally rebuilding my engine...i am gettin a 87 mm overbore w/ milled head and ported cylinder...my question is what kind of carb, and reeds do i need to run w/ this?? would i be able to get away w/ my stock carb for a while?? any help or other suggestions is appreciated

 

What model is your quad???

 

its a 94 4x4...i really need carb suggestions

 

95 i mean

 

are you going with a trail or race port?if your trail porting,and dont wanna buy a different carb right away,just have the stock one bored out.for race porting,go with a 39pwk carb for sure.the pwk will work really well on a trail ported cylinder also..
i run v-force reeds and hear of alot of people stating they are the best??whats the reason your going with a 87mm piston?if it doesnt need to be bored that much then i wouldnt go that much.bore it to what you can get away with and save the extra bores for future rebuilds..who are you having do the work?

 

39pwk and vforce reedz. excellent combo


hey thewayout420!!! howd u get your front end lowered?